7.1 Small and medium-sized blasting pots
A blasting pot is the main element for compressed-air blasting. Its volume determines the amount of abrasive being available and thus the blasting time that can be obtained without interruption of the abrasive blasting process. In general, the following volumes have been accepted for the blasting pots.
Filling volume:
30 l
100 l
140 l
200 l
300 l
500 l
The pot containing 200 l is the variant that is used for the most part. For a complete filling, i.e. about 300 kg of slag-abrasive, a permanent blasting time of about 30 – 45 minutes results if an 8 mm venture jet nozzle will be used.
200 l – blasting pot
Click to enlarge!
- Table of contents
- 1. Fields of application of abrasive blasting technology
-
2. Blasting technology
- 2.1 Airless blast cleaning
-
2.2 Injection blasting
- 2.2.1 Compressed air blasting (also air blast cleaning or sand blasting)
- 2.2.2 Pressure blasting (injector blasting)
- 2.2.3 Vacuum-compressed-air blasting and vacuum injection blasting
- 2.2.4 Damp blasting
- 2.2.5 Wet blasting
- 2.2.6 Slurry blasting
- 2.2.7 Ice Blasting
- 2.2.8 Water- jetting cleaning and hydro-jetting
- 2.2.9 Wet blasting for fine surface treatment
- 2.2.10 Combination of different blasting methods
- 2.3 Laser cleaning
- 3. Abrasive
- 4. Efficiency assessment of abrasive blasting
- 5. Influence of compressed-air blasting on the surface of the workpiece
- 6. Generation of compressed air
-
7. Plants for compressed-air blasting
- 7.1 Small and medium-sized blasting pots
- 7.2 Large blasting pots
- 7.3 Double-chamber blasting pot
- 7.4 Mixing and dosing valve
- 7.5 Hoses, lengths of hoses, couplings
- 7.6 Selection of a blasting pot in considering the wear and tear behaviour
- 7.7 Increased wear and tear at the blasting pot caused by wrong adjustment
- 8. Remote control and emergency shut-downs
- 9. Jet nozzles
- 10. Stationary blasting halls
- 11. Mobile abrasive blasting equipment
- 12. Laws and provisions